Ip Configuration Commands; Management Access Commands; System Information Commands - Foundry Networks IronPoint 200 User Manual

IP Configuration Commands

Command
ip address
ip dhcp
dns primary-server
dns secondary-server

Management Access Commands

Command
user
ip ssh-server enable
ip ssh-server port
ip telnet-server enable
ip http port
ip http server
ip https port
ip https server

System Information Commands

Command
show system
show version
show hardware
show tech-support
show station
show inventory
December 2006
Function
Sets the IP address for the Ethernet interface IC-E
Submits a DHCP request for an IP address
Specifies the primary name server
Specifies the secondary name server
Function
Configures new user names and passwords for
management access
Enables the Secure Shell server
Sets the Secure Shell port
Enables the Telnet server
Specifies the port to be used by the Web browser
interface
Allows the access point to be monitored or configured
from a browser
Specifies the UDP port number used for a secure HTTP
connection to the access point's Web interface
Enables the secure HTTP server on the access point
Function
Displays system information
Displays version information for the system software
Displays version information of the system hardware
Displays information from all CLI show commands
Displays the wireless clients associated with the
access point.
Displays the status and configuration information for
each VAP on an access point
© 2006 Foundry Networks, Inc.
Complete List of CLI Commands
Mode Page
8-2
IC-E 8-3
IC-E 8-3
IC-E 8-3
Mode Page
GC 9-2
IC-E 9-4
IC-E 9-5
IC-E 9-5
GC 9-6
GC 9-6
GC 9-7
GC 9-7
Mode Page
Exec 23-2
Exec 23-2
Exec 23-2
Exec 23-3
Exec 23-5
Exec 23-7
5-3