Web Management Interface Advanced Security - Foundry Networks IronPoint 200 User Manual

Foundry IronPoint 200 User Guide
Encryption – Enable or disable the VAP interface to use data encryption (WEP shared keys, WPA or
WPA2). For WPAor WPA2 over 802.1x security, select one of the following encryption cipher options.
For WPA2 over 802.1x security, you can also enable pre-authentication:
• WPA-TKIP: Use TKIP encryption for the multicast cipher. TKIP or AES-CCMP can be used for
the unicast cipher under "supported" mode depending on the capability of the client. Under the
WPA "required" mode, only the TKIP unicast cipher is allowed.
• TKIP-WEP Mixed Mode: Use WEP encryption for the multicast cipher. TKIP or AES-CCMP can
be used for the unicast cipher depending on the capability of the client.
• WPA2-AES CCMP: Use AES-CCMP encryption for the unicast and multicast cipher.
• AES-TKIP Mixed Mode: Use TKIP encryption for the multicast cipher. TKIP or AES-CCMP can
be used for the unicast cipher depending on the capability of the client.

Web Management Interface Advanced Security

From the VAP interface Security page, you can click on the "Advanced" button to access a detailed
security page where other security settings are available. If security settings have been made using
the CLI that can only be configured from the Advanced page, this page automatically displays
instead of the basic security page.
From the Advanced security page, click the "Basic" button to return to the basic VAP interface
security page.
21-20 © 2006 Foundry Networks, Inc. December 2006