Using The Web Management Interface; Displaying Log Messages - Foundry Networks IronPoint 200 User Manual

Using the Web Management Interface

From the main menu, click Syslog & Time. Enable logging and specify a Syslog server or enable
logging to the console interface. Set the Logging Level to restrict the number of messages that are
logged. Click Apply.
System Log Setup – Enables the logging of error messages. (Default: Disable)
Logging Host – Enables the sending of log messages to a Syslog server host. Up to four Syslog
servers are supported on the access point. (Default: Disable)
Server Name/IP – The IP address or name of a Syslog server. (Host Name: 1 to 255 characters)
UDP Port – The UDP port used by a Syslog server.
Logging Console – Enables the logging of error messages to the console. (Default: Disable)
Logging Level – Sets the minimum severity level for event logging. (Default: Informational)

Displaying Log Messages

The log messages generated by the access point and stored in memory can be viewed to check
system events and errors. The access point also allows all the log messages to be cleared.
December 2006 © 2006 Foundry Networks, Inc.
System Logging
12-5