Using The Web Management Interface - Foundry Networks IronPoint 200 User Manual

Default Setting
1
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
• To implement the default VLAN ID setting for VAP interface, the access point must enable
VLAN support using the vlan command.
• When VLANs are enabled, the access point tags frames received from wireless clients with the
default VLAN ID for the VAP interface. If IEEE 802.1x is being used to authenticate wireless
clients, specific VLAN IDs can be configured on the RADIUS server to be assigned to each
client. Using IEEE 802.1x and a central RADIUS server, up to 64 VLAN IDs can be mapped to
specific wireless clients.
• If the VLAN ID has not been configured for a client on the RADIUS server, then the frames are
tagged with the default VLAN ID of the VAP interface.

Using the Web Management Interface

From the main menu, under the Radio Interface 802.11a or Radio Interface 802.11g, click Radio
Settings. Enter a default VLAN ID for each VAP interface. Click Apply.
Default VLAN ID – The VLAN ID assigned to wireless clients that are not assigned to a specific
VLAN by RADIUS server configuration. (Default: 1)
December 2006 © 2006 Foundry Networks, Inc.
VLAN Support
22-5