Foundry Networks IronPoint 200 User Manual page 195

Foundry AP#show interface wireless a 0
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description
SSID
BSSID
Turbo Mode
Channel
Status
---------- Auto Channel Selection & Transmit Power Control Parameters ----
Auto Refresh Interval
Auto Transmit Power Control
----------------802.11 Parameters----------------------------------------
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
Authentication Timeout Interval : 60 Mins
Association Timeout Interval
DTIM Interval
Maximum Association
VLAN ID
Load Balance
----------------Security-------------------------------------------------
Closed System
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
PMKSA Lifetime
Encryption
WEP Key Length
Default Transmit Key
WEP Key Type
Common Static Keys
Pre-Authentication
Authentication Type
----------------Antenna--------------------------------------------------
Antenna Control method
Antenna ID
Antenna Location
----------------Authentication Parameters---------------------------------
802.1x
Broadcast Key Refresh Rate
802.1x Session Timeout Value
=========================================================================
December 2006
: Foundry 802.11a Access Point
: Foundry AP 0
: 00-0C-DB-8B-36-0C
: OFF
: 36 (AUTO)
: Disable
: 60 min.
: Disabled
: FULL (16 dBm)
: 54Mbps
: 6Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 30 Mins
: 1 beacon
: 64 stations
: 1
: Enabled (5)
: DISABLED
: DISABLED
: PRE SHARED KEY
: PASSPHRASE
: 720 minutes
: Disabled
: None
: 1
: Key 1: HEX
Key 3: HEX
: Key 1: EMPTY
Key 3: EMPTY
: Disabled
: OPEN
: Full diversity
: Integrated
: Indoor
: DISABLED
: 120 min
: 0 min
© 2006 Foundry Networks, Inc.
Radio Interface Configuration
Key 2: HEX
Key 4: HEX
Key 2: EMPTY
Key 4: EMPTY
20-25