Syslog; 2006 Foundry Networks, Inc; Dhcp - Foundry Networks IronPoint 200 User Manual

Informational SNMP v3 support: Enable | Disable SNMP
service and traps

Syslog

Message Level
Error
Informational
Informational

DHCP

Message Level
Informational
Informational
Informational
Informational
Informational
December 2006
Message
Syslog : Configuration file version changed
Syslog : TCP connection fail, Drop message
<message>
Syslog : Can't connect to syslog server
<IP-address>
Message
DHCP Client : Send Discover
DHCP Client : Receive Offer from <address> The access point has received a
DHCP Client : Send Request, Request IP =
<IP-address>
DHCP Client : Receive Nak
DHCP Client : Receive Ack from <address>,
Lease time = <duration>
© 2006 Foundry Networks, Inc.
SNMP management access has been
enabled or disabled. If it is enabled, SNMP
traps can be sent.
This message is generated if SNMP v3 is
configured on the access point.
Explanation
Syslog settings were found in a
configuration file of a previous version.
The settings have been reset to default
values.
The TCP connection with the syslog
server failed and the specified
message was not sent.
The access point cannot connect to
the specified syslog server.
Explanation
The access point has sent a DHCP
discover message.
configuration offer from the specified
DHCP server.
The access point has sent a request to
the DHCP server to use the offered IP
address.
The access point has received a reject
message from the DHCP server in
response to a client request.
The access point has received an
accept message from the specified
DHCP server to use the offered IP
address for a specified duration.
B-11