Foundry Networks IronPoint 200 User Manual page 54

Foundry IronPoint 200 User Guide
Example
Foundry AP#help
Help may be requested at any point in a command by entering
a question mark '?'.
be empty and you must backup until entering a '?' shows the
available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is entered
and you want to know what arguments match the input
(e.g. 'show pr?'.)
Foundry AP#
prompt
This command customizes the CLI prompt. Use the no form to restore the default prompt.
Syntax
prompt <string>
no prompt
string - Any alphanumeric string to use for the CLI prompt. (Maximum length: 255 characters)
Default Setting
Foundry AP
Command Mode
Global Configuration
Example
Foundry AP(config)#prompt RD2
RD2(config)#
ping
This command sends ICMP echo request packets to another node on the network.
Syntax
ping <host_name | ip_address>
• host_name - Alias of the host.
• ip_address - IP address of the host.
Default Setting
None
Command Mode
Exec
6-6
If nothing matches, the help list will
© 2006 Foundry Networks, Inc. December 2006