Foundry Networks IronPoint 200 User Manual page 174

Foundry IronPoint 200 User Guide
Syntax
vap <vap-id>
vap-id - The number that identifies the VAP interface. (Options: 0, 1, 2, or 3)
Default Setting
None
Command Mode
Interface Configuration (Wireless)
description
This command adds a description to a the VAP interface. Use the no form to remove the description.
Syntax
description <string>
no description
string - Comment or a description for this interface.
(Range: 1-80 characters)
Default Setting
None
Command Mode
Interface Configuration (Wireless-VAP)
antenna
This command selects the built-in antennas or an optional high-gain antenna attached to the socket
on the right antenna.
Syntax
antenna <type | diversity | location>
• type - Selects the antenna to be used by the access point; either the integrated diversity
antennas or an external antenna.
• diversity - Selects the antenna diversity to use.
- full - Selects the built-in diversity antennas. The transmitted signal is sent out both antennas,
and the antenna with the best incoming signal is used for reception.
- fixed_A - The right antenna is used both for transmission and reception. Use this setting
when an optional high-gain antenna is attached to the access point.
• location - Selects the mounting location of the antenna in use; either "Indoor" or "Outdoor."
Default Setting
Type: Integrated
Diversity: Full
Location: Indoor
Command Mode
Interface Configuration (Wireless)
20-4 © 2006 Foundry Networks, Inc. December 2006