Complete List Of Cli Commands; Command Groups - Foundry Networks IronPoint 200 User Manual

This chapter provides a complete list of CLI commands separated into functional groups. Cross-
reference page numbers are provided to the detailed description for each command.

Command Groups

The access point CLI commands can be broken down into the functional groups shown below.
Command Group
General System
IP Configuration
Management Access
System Information
System Identification
System Logging
System Clock
SNMP
Flash/File
RADIUS Client
802.1x
Authentication
MAC Address
Authentication
Bridging and Traffic
Filtering
December 2006

Complete List of CLI Commands

Description
Basic commands for entering configuration mode, restarting the system,
or quitting the CLI
Configures the access point's IP settings
Configures user names and passwords, SSH, Telnet, and browser
management options
Displays access point information and current status
Specifies the host name for the access point
Configures system logging parameters
Configures SNTP and system clock settings
Configures community access strings, trap receivers, and assigns
SNMP v3 users to groups
Manages code image or access point configuration files
Configures the RADIUS client used with 802.1x authentication
Configures 802.1x authentication
Configures MAC address authentication
Filters communications between wireless clients, controls access to the
management interface from wireless clients, and filters traffic using
specific Ethernet protocol types
© 2006 Foundry Networks, Inc.
Chapter 5
Page
5-2
5-3
5-3
5-3
5-4
5-4
5-4
5-4
5-5
5-6
5-7
5-6
5-8
5-1