Using The Web Management Interface - Foundry Networks IronPoint 200 User Manual

Command Usage
• Using a short preamble instead of a long preamble can increase data throughput on the access
point, but requires that all clients can support a short preamble.
• Set the preamble to long to ensure the access point can support all 802.11b and 802.11g
clients.

Using the Web Management Interface

From the main menu, under the Radio Interface 802.11g , click Radio Settings. Select Enable for the
radio and select an operating mode. Then configure a specific radio channel from the drop-down list,
or select Auto Channel Select. For each VAP interface, set the Native VLAN ID, Hidden-SSID,
authentication and association timeout intervals. If you are using WEP keys, enter at least one key
and set the keys to use for each VAP interface. Modify other settings as required. Click Apply.
December 2006 © 2006 Foundry Networks, Inc.
Radio Interface Configuration
20-21