Foundry Networks IronPoint 200 User Manual page 53

Example
This example shows how to return to the Exec mode from the Interface Configuration mode:
Foundry AP(if-ethernet)#end
Foundry AP#
exit
This command returns to the previous configuration mode.or exits the configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Exec mode from the Interface Configuration mode and then
quit the CLI session:
Foundry AP(if-ethernet)#exit
Foundry AP(config)#exit
Foundry AP#exit
CLI session with the Access Point is now closed
Username:
help
This command displays information on using the CLI.
Default Setting
None
Command Mode
Any
December 2006 © 2006 Foundry Networks, Inc.
General System and CLI Settings
6-5