Show Radius - Foundry Networks IronPoint 200 User Manual

Syntax
radius-server [secondary] timeout-interim <number_of_seconds>
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point waits between transmitting
accounting updates. (Range: 60-86400)
Default Setting
3600
Command Mode
Global Configuration
Command Usage
• The access point sends periodic accounting updates after every interim period until the user
logs off and a "stop" message is sent.
radius-server radius-mac-format
This command sets the format for specifying MAC addresses on the RADIUS server.
Syntax
radius-server radius-mac-format <multi-colon | multi-dash | no-delimiter | single-dash>
• multi-colon - Enter MAC addresses in the form aa:bb:cc:dd:ee:ff.
• multi-dash - Enter MAC addresses in the form aa-bb-cc-dd-ee-ff.
• no-delimiter - Enter MAC addresses in the form aabbccddeeff.
• single-dash - Enter MAC addresses in the form aabbcc-ddeeff.
Default Setting
No delimiter
Command Mode
Global Configuration
radius-server vlan-format
This command sets the format for specifying VLAN IDs on the RADIUS server.
Syntax
radius-server vlan-format <hex | ascii>
• hex - Enter VLAN IDs as a hexadecimal number.
• ascii - Enter VLAN IDs as an ASCII string.
Default Setting
ASCII
Command Mode
Global Configuration

show radius

This command displays the current settings for the RADIUS server.
November 2006 © 2006 Foundry Networks, Inc.
RADIUS Client Settings
15-5