What's New In This Release; Release 02.1.09; Release 02.1.00 - Foundry Networks IronPoint 200 User Manual

Category
Wireless Security

What's New in This Release

The following table summarizes the features and changes that are new in software release version
02.1.xx.

Release 02.1.09

Enhancement
Support for IronPoint Wireless
Location Manager

Release 02.1.00

Enhancement
Automatic channel selection
Displaying neighbor
information
Ability to configure up to 32
user accounts
December 2006
Feature
Virtual access points per radio (4)
Hidden SSID
RADIUS MAC authentication
Local MAC authentication
802.1x client authentication
WEP authentication
WEP encryption (64, 128, 152 bit)
Dynamic WEP keys with 802.1x
WPA and WPA2 over 802.1x
WPA and WPA2 Pre-shared Key
WPA-WPA2 Mixed Mode
WPA2 Pre-authentication
TKIP encryption
AES-CCMP encryption
Description
If you are using IronPoint Wireless Location Manager,
inline-scanning
configure the
report neighbor access points.
Description
You can configure access points to automatically select a
channel and transmission power for its radios
The show neighbor-ap report displays the broadcast SSIDs
of the neighbor access points, the channels they are using,
and the strength of the signal of the channel.
You can now configure up to 16 Admin user accounts and up
to 16 Read-Only user accounts
© 2006 Foundry Networks, Inc.
IronPoint 200
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
command fo scan for and
About This Guide
See Page
6-9
See Page
20-5 and 20-19
20-14
9-1
1-5