Using The Web Management Interface - Foundry Networks IronPoint 200 User Manual

ip ssh-server port
This command sets the Secure Shell server port. Use the no form to disable the server.
Syntax
ip ssh-server port <port-number>
• port-number - The UDP port used by the SSH server. (Range: 1-65535)
Default Setting
22
Command Mode
Interface Configuration (Ethernet)
ip telnet-server enable
This command enables the Telnet server. Use the no form to disable the server.
Syntax
ip telnet-server enable
no ip telnet-server
Default Setting
Interface enabled
Command Mode
Interface Configuration (Ethernet)

Using the Web Management Interface

From the main menu, click Administration. Enable or disable the Telnet and SSH servers and set the
SSH server port as required. Click Apply.
Telnet Server – Enables or disables the Telnet server. (Default: Enabled)
SSH Server – Enables or disables the SSH server. (Default: Enabled)
SSH Port Number – Sets the UDP port for the SSH server. (Range: 1-65535; Default: 22)
November 2006 © 2006 Foundry Networks, Inc.
Management Access Settings
9-5