Foundry Networks IronPoint 200 User Manual page 183

• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0, 1, 2, or 3)
Command Mode
Exec
Example:
Foundry AP#show interface wireless a 0
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description
SSID
BSSID
Turbo Mode
Channel
Status
--------Auto Channel Selection & Transmit Power Control Parameters-------
Auto Refresh Interval
Auto Transmit Power Control
Auto Channel Selection Mode
----------------802.11 Parameters----------------------------------------
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
Authentication Timeout Interval : 60 Mins
Association Timeout Interval
DTIM Interval
Maximum Association
VLAN ID
----------------Security-------------------------------------------------
Closed System
Multicast cipher
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
Encryption
Default Transmit Key
Common Static Keys
Authentication Type
----------------Antenna--------------------------------------------------
Antenna Control method
Antenna ID
Antenna Location
----------------Authentication Parameters---------------------------------
802.1x
Broadcast Key Refresh Rate
Session Key Refresh Rate
802.1x Session Timeout Value
=========================================================================
Foundry AP#
December 2006
: IP200-VAP0
: ironpoint-vap0
: 00-0C-DB-8A-C0-8C
: ON
: 42
: Enable
: 30 min.
: DISABLED
: OVERLAP
: HALF (5 dBm)
: 54Mbps
: 6Mbps
: 512 bytes
: 256 bytes
: 150 TUs
: 20 Mins
: 5 beacons
: 32 stations
: 1234
: DISABLED
: WEP
: SUPPORTED
: PRE SHARED KEY
: HEX
: DISABLED
: 1
: Key 1: EMPTY
Key 3: EMPTY
: OPEN
: Full diversity
: Integrated
: Outdoor
: DISABLED
: 120 min
: 120 min
: 0 min
© 2006 Foundry Networks, Inc.
Radio Interface Configuration
Key 2: EMPTY
Key 4: EMPTY
20-13