Foundry Networks IronPoint 200 User Manual page 203

To view the current 802.11g security settings, use the show interface wireless g command from the
Exec level.
Foundry AP#show interface wireless g
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description
SSID
BSSID
Channel
Status
----------------802.11 Parameters----------------------------------------
Radio Mode
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
Authentication Timeout Interval : 60 Mins
Association Timeout Interval
DTIM Interval
Preamble Length
Maximum Association
VLAN ID
----------------Security-------------------------------------------------
Closed System
Multicast cipher
Unicast cipher
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
PMKSA Lifetime
Encryption
Default Transmit Key
Common Static Keys
Pre-Authentication
Authentication Type
----------------Antenna--------------------------------------------------
Antenna Control method
Antenna ID
----------------Authentication Parameters---------------------------------
802.1x
Broadcast Key Refresh Rate
Session Key Refresh Rate
802.1x Session Timeout Value
=========================================================================
Foundry AP#
December 2006
: Foundry 802.11g Access Point
: Foundry AP 0
: 00-0C-DB-84-40-80
: 11 (AUTO)
: Disable
: 802.11b+g
: FULL (13 dBm)
: 54Mbps
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 30 Mins
: 2 beacons
: LONG
: 64 stations
: 1
: DISABLED
: WEP
: TKIP and AES
: SUPPORTED
: PRE SHARED KEY
: HEX
: 720 minutes
: 128-BIT ENCRYPTION
: 1
: Key 1: *****
Key 3: EMPTY
: Disabled
: SHARED
: Full diversity
: Integrated
: DISABLED
: 120 min
: 120 min
: 0 min
© 2006 Foundry Networks, Inc.
Wireless Security Configuration
Key 2: EMPTY
Key 4: EMPTY
21-7