Radio Security - Foundry Networks IronPoint 200 User Manual

Hide thumbs Also See for IronPoint 200:
Table of Contents

Advertisement

Message Level
Informational
Informational
Informational
Informational
Informational

Radio Security

Message Level
Notice
Informational
Informational
Informational
Informational
Informational
Informational
December 2006
Message
DTIM period updated to <new-value>
Radio channel updated to AUTO
Antenna ID updated to <new-value>
Antenna Ctrl updated to <AUTO | A | B>
wlan <device-number> beacon transmission
problem at <beacon-count>
Message
Updating group key for all WPA clients
802.11<Radio ID>: Default Transmit Key
updated to Key Index <new-value>
802.11<Radio ID>: Authentication Mode set
to SHARED KEY
802.11<Radio ID>: Authentication Mode set
to OPEN
Authentication stale time updated to
<new-time>
WEP Key Type updated to <HEX | ASCII>
WEP Encryption Mode set to
<64-bit-encryption | 128-bit-encryption |
152-bit-encryption>
© 2006 Foundry Networks, Inc.
Explanation
The DTIM period for the specified
radio interface has been changed to
the specified value.
The radio channel for the specified
radio interface has been changed to
auto.
An external antenna ID for the
specified radio interface has been
changed to the new value.
The specified radio interface has been
set to use an external antenna on the
right-side (A), both sides (B), or to
automatically select antennas to use.
The access point was not able to send
a beacon frame on the specified radio
interface for the indicated beacon
count number.
Explanation
The encryption key for broadcast data
is being updated for all WPA clients
associated to the specified VAP
interface.
The WEP transmit key index has been
changed to the new index value for the
specified VAP interface.
The authentication mode for the
specified VAP interface has been set
to "Shared Key."
The authentication mode for the
specified VAP interface has been set
to "Open."
The authentication timeout interval has
been changed to the specified value.
The WEP key type has been changed
to the new value.
The WEP key length has been
changed to the new value.
B-5

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IronPoint 200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents