Table of Contents
Advertisement
Foundry IronPoint 200 User Guide
IP Allocation Mode – This field specifies how IP addresses for the PPPoE tunnel are configured on
the RJ-45 interface. The allocation mode depends on the type of service provided by the PPPoE
server. If automatic mode is selected, DHCP is used to allocate the IP addresses for the PPPoE
connection. If static addresses have been assigned by the service provider, you must manually enter
the assigned addresses. (Default: Automatic)
•
Automatically allocated: IP addresses are dynamically assigned by the service provider during
PPPoE session initialization.
•
Static assigned: Fixed addresses are assigned by the service provider for both the local and
remote IP addresses.
Local IP Address – IP address of the local end of the PPPoE tunnel. (Must be entered for static IP
allocation mode.)
Remote IP Address – IP address of the remote end of the PPPoE tunnel. (Must be entered for static
IP allocation mode.)
14-8
© 2006 Foundry Networks, Inc.
November 2006
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IronPoint 200 and is the answer not in the manual?