Foundry Networks IronPoint 200 User Manual page 194

Foundry IronPoint 200 User Guide
weight - The weight of the signal that corresponds to the desired management RSSI, the
received signal strength of the 802.11 management packets, as presented in the following
table:
Weight
1
2
3
4
5
6
7
8
9
10
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless - 802.11a or Wireless - 802.11b/g)
Command Usage
A wireless client remains associated with an access point until the client either disconnects or is disassociated
from the access point because the association timeout interval has expired.
Use the association-timeout-interval command to configures the idle time interval (when no frames are sent)
after which the client is disassociated from the VAP interface.
Use the no loadbalance command to disable the feature.
show interface wireless
Use the
show interface wireless
The show interface wireless command now includes an entry that shows if load balance is enabled
or disabled.
20-24
Management RSSI
28%
31%
34%
37%
41%
44%
47%
50%
53%
56%
command to display the current load balance setting
© 2006 Foundry Networks, Inc. December 2006