Suzuki GRAND VITARA Owner's Manual page 13

• Whenever you use oil seals, gaskets,
packing, O-rings, locking washers, split
pins, self-locking nuts, and certain other
parts as specified, be sure to use new
ones. Also, before installing new gaskets,
packing, etc., be sure to remove any
residual material from the mating surfaces.
• Make sure that all parts used in
reassembly are perfectly clean.
• When use of a certain type of lubricant,
bond or sealant is specified, be sure to
remove the old one thoroughly and use the
specified type.
"A": Sealant 99000–31150 (SUZUKI Bond
No.1207C)
• Be sure to use special tools when
instructed.
Special tool
(A): 09917–98221
(B): 09916–58210
• When disconnecting vacuum hoses, attach
a tag describing the correct installation
positions so that the hoses can be
reinstalled correctly.
• After servicing fuel, oil, coolant, vacuum,
exhaust or brake systems, check all lines
I2RH01010029-01
related to the system for leaks.
• For vehicles equipped with fuel injection
systems, never disconnect the fuel line
between the fuel pump and injector
without first releasing the fuel pressure, or
fuel can be sprayed out under pressure.
• When performing a work that produces a
heat exceeding 80 °C in the vicinity of the
electrical parts, remove the heat sensitive
I2RH01010030-01
electrical part(s) beforehand.
I2RH01010031-01
Precautions: 00-6
I2RH01010032-01
I2RH01010033-01
I2RH01010034-01