Noread Message - Microscan MS-3 User Manual

Noread Message

Noread Message

Usage: Used in applications where the host needs serial verification that a sym-
bol has not been read and especially useful in new print verification.
Definition: When enabled, and if no symbol has been decoded before timeout or the
end of the read cycle, the noread message will be transmitted to the
host.
Noread Status
Serial Cmd: <K714,status,noread message>
Default: Enabled
Options: 0 = Disabled
Noread Message
Definition: Any combination of ASCII characters can be defined as the noread
message.
Serial Cmd: <K714,status,message>
Default: NOREAD
Options: 1 to 7 ASCII characters.
Note: Noread Message will only be transmitted if Symbol Output
Output Status" on page
Noread Message can be set to any ASCII characters except
MS-3 Laser Scanner User's Manual
6-8
1 = Enabled
6-4) is set to Match, Mismatch or Good Read.
("Symbol Data
NULL <> and , (comma).