Microscan MS-3 User Manual page 216

PDF Symbology
Serial Cmd: <K476,status,unused,fixed symbol length status,fixed symbol
length,decode at end of read cycle>
Default: 10
Options: 1 to 2710
Decode at End of Read Cycle (PDF417)
Definition: When enabled, the decoding of the PDF symbol takes place after the End
of Read Cycle requirements have been met. This allows the reader to
accumulate information about the current PDF symbol present but not
attempt to error correct or translate the information until the end of the
read cycle.
Serial Cmd: <K476,status,unused,fixed symbol length status,fixed symbol
length,decode at end of read cycle>
Default: Disabled
Options: 0 = Disabled
MS-3 Laser Scanner User's Manual
A-24
1 = Enabled