Service Message - Microscan MS-3 User Manual
Laser scanner
Hide thumbs
Also See for MS-3:
- Quick start manual (13 pages) ,
- User manual (106 pages) ,
- Manual book (202 pages)
Table of Contents
Advertisement
Service Message
Definition:
The service timer is reset on power-on, thus the timer only records the
time that has elapsed since the last reset.
The message is sent every time the timer expires.
Service Message Status
Definition:
When enabled, a message is sent whenever the system detects that a
user-set service time has expired.
Serial Cmd:
<K409,status,service message,threshold,resolution>
Default:
Disabled
Options:
0 = Disabled
Service Message
Serial Cmd:
<K409,status,service
Default:
SERVICE
Options:
Any 1 to 10 ASCII characters except
Threshold
Definition:
Sets the number of hours or minutes that will transpire before the Ser-
vice message is output.
Serial Cmd:
<K409,status,service message,threshold,resolution>
Default:
300
Options:
1 to 65,535
Resolution
Definition:
Records time in seconds or minutes.
Serial Cmd:
<K409,status,service message,threshold,resolution>
Default:
Seconds
Options:
0 = Seconds
message,threshold,resolution>
(5 minutes)
Chapter 8 Diagnostics
1 = Enabled
NULL < ,
or >.
1 = Minutes
MS-3 Laser Scanner User's Manual
8-9
- Quick Links:
- Figure 1-2 Hardware Connections
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-3 and is the answer not in the manual?