Microscan MS-3 User Manual page 65

Multisymbol Separator
Usage: Used to delimit or separate data fields with a user defined character.
Definition: The character that's inserted between each symbol scanned when Multi-
symbol is set to any number greater than 1.
ESP: To select a new multisymbol separator, double-click on
select a character in the popup window.
Serial Cmd: <K222,number of
Note: If Multisymbol Separator has been changed to any character
other than the default comma and you wish to re-define the separator as
a comma, use ESP or the embedded menu.
Default: , (comma)
Options: Any available ASCII character, except
symbols,multisymbol
< >
MS-3 Laser Scanner User's Manual
Chapter 4 Read Cycle
Separator
separator>
NUL.
and
4-5