Master Database - Microscan MS-3 User Manual

Master Database

Master Database

Important: Master Symbol Database is used only for comparing entire bar codes,
when Sequential and Wild Card are NOT enabled, and Start Position is equal to 0.
Usage: Useful where more than one master symbol is required, as in a Multi-
symbol setup, for matching and other matchcode operations.
Definition: Allows you to define up to 10 master symbols as the master symbol data-
base, which can be entered by keyboard, scanned in, displayed, or
deleted by serial or ESP commands.
Master Symbol Database Size
Definition: Master Symbol Database Size allows you to select 1 to 10 master
symbols for the master symbol database.
Serial Cmd: <K224,number of master
Default: 1
Options: 1 to 10
To access in ESP
1. Click the Utilities
2. Click the Matchcode Type
3. Set the number of master symbols you want to include.
Scroll
master symbol database size.
MS-3 Laser Scanner User's Manual
11-8
button and click the
checkbox to enable Matchcode.
up or down to set the
symbols>
Master Database tab.