Defaulting/Saving/Resetting; Table 11-4-Software Reset/Save/Recall Commands - Microscan MS-3 User Manual

Defaulting/Saving/Resetting

Defaulting/Saving/Resetting

Table 11-4 Software Reset/Save/Recall Commands
<A> Reset (does not save for power-on)
<Ard> Reset and recall Microscan defaults
<Arp> Reset and recall power-on parameters
<Arc> Reset and recall customer default parameters
<Z> Save current settings for power-on
<Zc> Save current settings as customer default parameters
Recall Microscan Wenglor default parameters and save for
<Zrd>
power-on
<Zrc> Recall customer parameters and save for power-on
See Appendix G — "Defaulting/Saving/Resetting" on page A-20
explanation on resets, saves and defaulting.
MS-3 Laser Scanner User's Manual
11-16
for complete