Table of Contents
Advertisement
Noread Message
Usage:
Used in applications where the host needs serial verification that a sym-
bol has not been read and especially useful in new print verification.
Definition:
When enabled, and if no symbol has been decoded before timeout or the
end of the read cycle, the noread message will be transmitted to the
host.
Noread Status
Serial Cmd:
<Kkstatus,message>
Default:
MISSING
Options:
Up to seven ASCII characters (except NUL)
Serial Cmd:
<Kkstatus,message>
Default:
Enabled
Options:
0 = Disabled
Noread Message
Definition:
Any combination of ASCII characters can be defined as the noread
message.
Serial Cmd:
<Kkstatus,message>
Default:
NOREAD
Options:
0 to 7 ASCII characters.
Note: Noread Message will only be transmitted if Symbol Data Output
Data Output" on page
6-3) is set to Match, Mismatch or Good Read.
Noread Message can be set to any ASCII characters except
MS-710 Scanner User's Manual
Chapter 6 I/0 Parameters
1 = Enabled
NULL <>
("Symbol
and
,
(comma).
6-7
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-710 and is the answer not in the manual?
Questions and answers