Microscan MS-3 User Manual page 96

Interleaved 2 of 5
Check Digit Status (Interleaved 2 of 5)
Usage: It is typically not used but can be enabled for additional security in appli-
cations where the host requires redundant check digit verification.
Definition: An error correcting routine in which the check digit character is added.
Serial Cmd: <K472,status,check digit
length #1,symbol length #2,unused,range mode>
Default: Disabled
Options: 0 = Disabled
Check Digit Output Status (Interleaved 2 of 5)
Definition: When enabled, a check digit character is sent along with the bar symbol
data for added data security.
Serial Cmd: <K472,status,check digit
length #1,symbol length #2,unused,range mode>
Default: Disabled
Options: 0 = Disabled
MS-3 Laser Scanner User's Manual
5-14
status,check digit output
1 = Enabled
status,check digit output
1 = Enabled
status,symbol
status,symbol