Read Cycle By Esp; Read Cycle By Serial Command - Microscan MS-3 User Manual

Read Cycle by ESP

Read Cycle by ESP

Click this Button to bring
up the Read Cycle/
Triggering menu
To change a setting,
double-click the set-
ting and use your cur-
sor to scroll through
the options.
To open nested options,
single-click the +.

Read Cycle by Serial Command

Command Title
Multisymbol
Trigger Mode
External Trigger State
Serial Trigger Character
Start Serial Trigger Character
End Serial Trigger Character
End of Read Cycle
Decodes Before Output
Automatic Gain Control
Scan Speed
Symbol Detect/Transition
Maximum Element
Scan Width Enhance
Laser Controls
MS-3 Laser Scanner User's Manual
4-2
<K222, number of symbols,multisymbol separator>
<K200, trigger mode,trigger filter duration>
<K202, external trigger state>
<K201, serial trigger character>
<K229,start trigger character>
<K230, end trigger character>
<K220, end of read cycle,read cycle timeout>
<K221, number before output,decodes before output mode>
<K504, gain level,AGC sampling mode,AGC min,AGC max>
<K500,scan speed>
<K505, symbol detect status,transition counter>
<K502, maximum element>
<K511,scan width enhance>
<K700, laser on/off status,laser framing status,laser on position,laser
off position,laser power>
Format