Laser High - Microscan MS-3 User Manual

Laser High

When enabled, a message is transmitted whenever the laser current exceeds a factory-
calibrated reference value which cannot be altered. The message repeats once every 30
minutes until the condition is corrected.
Laser High Status
Usage: Alerts the user to impending laser failure. (Contact Service.)
Definition: Enables the Laser High message.
Serial Cmd: <K411,laser high
message>
Default: Enabled
Options: 0 = Disabled
Laser High Message
Definition: Defines the Laser High message.
Serial Cmd: <K411,laser high
message>
Default: HIGH-LASER
Options: Any 1 to 10 character ASCII string except NUL, <, or >.
status,laser high message,laser low status,laser low
1 = Enabled
status,laser high message,laser low status,laser low
MS-3 Laser Scanner User's Manual
Chapter 8 Diagnostics
8-7