Setup Mode - Microscan MS-3 User Manual

Setup Mode

Setup Mode

In Setup Mode you are presented with the
application, Calibration. After connecting to your scanner (or reader) the Setup Mode
will first appear. This will provide you with instructions specific to your model that will
help you in positioning, testing, and if appropriate, calibrating.
Test
Click the Test button to start the read rate test for a quick indication of the read capa-
bilities and the limits of your application. When Decodes per Second is unchecked,
the test will count the percentage of decodes relative to the number of actual scans.
Click Stop to end the test.
Calibrate
Some models include a calibration routine that will optimize reads by comparing read
rates at various settings in focal lengths, scan speeds, and gain settings.
MS-3 Laser Reader User's Manual
2-2
Test
Note: This view may be
slightly different for each
model.
On some models, clicking Auto Discriminate
will enable most available symbology types.
option and if appropriate for your
Test button
Click here to change
from percentage of
good decodes to
decodes per second
Calibration is avail-
able on some models
Saves Calibration
results (if available)
Ends the read rate
test