Checking/Clearing The Maintenance Cycle - Kyocera FS-C8600DN Service Manual

Item No.
U247 Method: [SMT]
1. Press the OK key.
2. Select [Motor] or [Device].
1. Select the item to be operated using the Left/Right Select keys
Motor
Device
2. Select [Execute].
3. Press the OK key. The operation starts.
To stop operation, press the Back key.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U250

Checking/clearing the maintenance cycle

Description
Changes preset values for maintenance cycle.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance is peri-
odically displayed.
Setting
1. Press the OK key.
2. Select the item to be set.
3. Change the setting using the Left/Right Select keys or numeric keys.
Display
M.Cnt A
M.Cnt B
M.Cnt C
4. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Display
Off
On
C1 Clutch
Feed1 Clutch
Feed2 Clutch
Feed3 Clutch
Cassette1 Solenoid
Separator Solenoid
Description
Preset values for maintenance cycle (kit A) 0 to 9999999
Preset values for maintenance cycle (kit B) 0 to 9999999
Preset values for maintenance cycle (kit C) 0 to 9999999
Description
Description
SM paper feed motor (SMPFM) is turned off
SM paper feed motor (SMPFM) is turned on
SM paper conveying clutch 1 (SMPCCL1) is turned on
SM paper conveying clutch 2 (SMPCCL2) is turned on
SM paper conveying clutch 3 (SMPCCL3) is turned on
SM paper conveying clutch 4 (SMPCCL4) is turned on
SM pickup solenoid (SMPUSOL) is turned on
SM feedshift solenoid (SMFSSOL) is turned on
1-3-104
Setting range Initial
setting
600000
600000
300000
2MN/2N1