Image Formation Problems - Kyocera FS-C8600DN Service Manual

1-4-3 Image formation problems

If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
See page 1-4-86
(6) Black streaks
are printed verti-
cally.
See page 1-4-88
(10)The leading
edge of the
image is con-
sistently mis-
aligned with the
original.
See page 1-4-89
(15)Fusing is loose. (16)Image is out of
See page 1-4-91
(2) No image (3) Image is too
appears (entirely
black).
See page 1-4-86
(7) Streaks are
printed horizon-
tally.
See page 1-4-88
(11) The leading (12)Paper is wrin-
edge of the
image is spo-
radically mis-
aligned with the
original.
See page 1-4-89
(17)Image center
focus.
See page 1-4-91
(4) The back-
light.
See page 1-4-87 See page 1-4-87
(8) Spots are
See page 1-4-89
(13)Offset occurs.
kled.
See page See page 1-4-90
(18)Unevenly repeat-
does not align
with the original
center.
See page 1-4-91 See page 1-4-91
1-4-85
(5) White streaks
ground is col- are printed verti-
ored. cally.
See page 1-4-88
(9) Image is
printed.
See page 1-4-89
(14)Part of image is
See page 1-4-90
(19)Colored spots
ing horizontal
streaks in the
printed objects.
See page 1-4-91
2MN/2N1
blurred.
missing.
in the printed
objects.