2. Raise the tray fixing plate.
3. Latch the three hooks to the job sepa-
rator tray.
4. Load the tray on the tray fixing board
and slide it to secure.
*: Make sure that the two clicks have been
properly locked.
Release of lift plate stopper
1. Pull cassette 1 and 2 out.
2. Remove the lift plate stopper from each
cassette and attach it to the storage
location.
When moving the machine, attach the
lift plate in original position.
Jobseparator tray
Hook
Hook
Figure 1-2-12
Figure 1-2-13
1-2-9
2MN/2N1-1
Hooks
Hook
Tray fixture plate
Lift plate
stopper
Cassette