1-5-7 PWBs
(1) Detaching and refitting the main PWB
Procedure
1. Remove two screws.
2. Unhook three hooks and then remove
the left upper cover.
3. Remove the rear upper cover (see page
1-5-56).
4. Release
five
wire saddles on the con-
troller box.
Hooks
Screws
Left upper cover
Wire saddles
Wire saddle
Figure 1-5-66
1-5-44
Hook
Left upper cover
Figure 1-5-65
Wire saddles
Controller box
2MN/2N1-1