Setting The Cassette Heater Control - Kyocera FS-C8600DN Service Manual

Item No.
U327

Setting the cassette heater control

Description
Sets the cassette heater control.
Purpose
To change the setting according to the machine installation environment.
Setting
1. Press the OK key.
2. Select On or Off.
Mode1
Mode2
Off
Initial setting: Off
3. Press the OK key. The setting is set.
* : To finalize the setting values, exit the maintenance mode, perform shut-down from the
normal display, and turn the main power switch off and on again.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Display
Set to On at 65% RH (during sleep mode or in ready state)
Always on (during sleep mode or in ready state)
Cassette heater OFF
Description
Description
1-3-112
2MN/2N1-1