Setting Finisher Stack Quantity - Kyocera FS-C8600DN Service Manual

Item No.
U237

Setting finisher stack quantity

Description
Sets the number of sheets of each stack on the main tray and on the middle tray in 4000-sheet
finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the OK key.
2. Select the item to be set.
Main Tray
Middle Tray
Setting: [Main Tray]
1. Change the setting using the numeric keys.
0
1
Initial setting: 0
2. Press the OK key. The setting is set.
3. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
Setting: [Middle Tray]
1. Change the setting using the numeric keys.
0
1
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple printing: 10 sheets
2. Press the OK key. The setting is set.
3. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
Display
Number of sheets of stack on the main tray
Number of sheets of stack on the middle tray for staple mode
Display
Number of sheets of stack on the main tray: 4000 sheets
Number of sheets of stack on the main tray: 2000 sheets
Display
Number of sheets of stack on the middle tray for staple mode:
65 sheets
Number of sheets of stack on the middle tray for staple mode:
30 sheets
Description
Description
Description
Description
1-3-90
2MN/2N1-1