Detaching And Refitting The Main Drive Unit - Kyocera FS-C8600DN Service Manual

(2) Detaching and refitting the main drive unit

Procedure
1. Remove the drum drive unit K and the
drum drive unit MCY (see page 1-5-61).
2. Release three wire saddles on the main
drive unit.
3. Remove two connectors.
4. Remove five screws.
5. Remove the main drive unit.
6. Check or replace the main drive unit
and refit all the removed parts.
Main drive unit
Connector
Wire saddle
Main drive unit
Wire saddles
Figure 1-5-99
Screw
Screw
Screw
Figure 1-5-100
1-5-64
2MN/2N1
Connector
Main drive unit
Screw
Screw