Detaching And Refitting The Developer Unit And Drum Unit - Kyocera FS-C8600DN Service Manual

(2) Detaching and refitting the developer unit and drum unit

Detaching example: Developer unit Y and Drum unit Y
Procedure
1. Remove the fuser unit (see page 1-5-
40).
2. Pull the transfer belt unit out a little (see
page 1-5-34).
3. Remove the inner unit (see page 1-5-
27).
4. Close the toner supply shutter.
5. Remove two connectors.
6. Pull out as one body the developer unit
and the drum unit.
(The developer unit becomes basic and
the drum units are combined.)
7. Detach the developer unit while sup-
porting bottom.
Toner supply shutter
Developer unit
Developer unit
Drum unit
Developer unit
1-5-29
Figure 1-5-44
Drum unit
Figure 1-5-45
2MN/2N1
Connectors