Setting Punch Destination - Kyocera FS-C8600DN Service Manual

Item No.
U234

Setting punch destination

Description
Sets the destination of punch unit of 1000-sheet finisher or 4000-sheet finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the OK key.
2. Select the destination.
Auto
Japan Metric
Inch
Europe Metric
Initial setting: Inch (Inch specifications)/Europe Metric (Metric specifications)
3. Press the OK key. The setting is set.
4. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
Display
Conforms to destination settings.
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
Description
Description
1-3-89
2MN/2N1-1