Kyocera FS-C8600DN Service Manual page 152

Item No.
U161 Setting: [Print]
1. Select the item to be set.
2. Change the setting value using the numeric keys.
Display
F.S.Print(C)
Dup Shift(C)
3. Press the OK key. The value is set.
Setting: [LowPower Mode]
1. Select the item to be set.
Mode0
Mode1
Mode2
Initial setting: Mode1
2. Press the OK key. The setting is set.
Setting: [Grain Mode]
1. Select the item to be set.
Mode0
Mode1
Mode2
Initial setting: Mode0
Press the OK key. The setting is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Description
Temperature at maximum
print speed (Center)
Temperature at duplex
printing (Center)
Display
Not used normally (use when a fusing problem has occurred at
continuous printing in mode 1, however, use caution that mode
0, when used continously, can deteriorate the durability of the
fuser rollers).
Fuser control temperature reduction mode (For normal users)
Large volume output mode (For users who repeatedly print
approximately 1500 sheets at a time)
Display
Existing level (No special treatment)
Setting the grain mode
More improvements
Description
Setting
range
130 to 200 170
(°C)
-20 to 20 5
(°C)
Description
Description
1-3-84
2MN/2N1-1
Initial setting
45ppm 55ppm
175
5