Setting Backup Data Reading/Writing - Kyocera FS-C8600DN Service Manual

Item No.
U917

Setting backup data reading/writing

Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB
memory to the machine.
Purpose
To store and write data when replacing the HDD.
Method
1. Perform shut-down on the operation panel, turn power off (see page p.1-2-19).
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
Wait for 10 seconds to allow the machine to recognize the USB memory.
4. Enter maintenance item U917.
5. Select [Import] or [Export].
Import
Export
6. Select the item.
Display
Job Account
User
Document Box
* : Since data are dependent with each other, data other than those assigned are also
retrieved or written in.
7. Press the OK key. Starts reading or writing.
The progress of selected item is displayed in %.
When an error occurs, the operation is canceled and an error code is displayed.
8. When normally completed, [Finish] is displayed.
9. Turn the main power switch off and on after completing writing when selecting [Import].
Display
Writing data from the USB memory to the machine
Retrieving from the machine to a USB memory
Description
Job accounting
User managements
Document box information
Description
Description
-
Job accounting
Job accountings and user manage-
ments
1-3-141
2MN/2N1-1
Depending data