Detaching And Refitting The Hard Disk Unit - Kyocera FS-C8600DN Service Manual

(7) Detaching and refitting the hard disk unit

Procedure
1. Perform maintenance mode U917
(backup data reading) (see page 1-3-
141).
2. Remove the rear upper cover (see page
1-5-56).
3. Release the wire saddle.
4. Remove two screws.
5. Unhook two hooks and pull out the
HDD bracket a little.
Screws
Wire saddle
Hook
Hook
HDD bracket
Figure 1-5-120
1-5-78
Figure 1-5-119
2MN/2N1