Kyocera FS-C8600DN Service Manual page 221

* : This model does not support the following codes:
0132 /0505 /0515 /9030
Code Contents
0000 Initial jam
0100 Secondary paper feed
request time out
0101 Waiting for process
package to become
ready
0102 Waiting for toner pack-
age to become ready
0103 Waiting for the image-
sustaining package to
become ready
0104 Waiting for conveying
package to become
ready
0106 Paper feeding request
for duplex printing time
out
0107 Waiting for fuser pack-
age to become ready
0108 Waiting for option pack-
age to become ready
0110 Paper conveying unit
open
0111 Front cover open
0112 Duplex cover open
0113 Paper conveying cover
open
0114 BR conveying unit open
0115 BR eject cover open
0131 MP lift sensor upper limit
detection
0200 Machine sequence error
0210 PF paper conveying
cover open
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Conditions
The power is turned on when a sensor in the convey-
ing system is on.
Secondary paper feed request given by the controller
is unreachable.
Process package won't become ready.
Toner package won't become ready.
The image-sustaining package won't become ready.
Conveying package won't become ready.
Paper feeding request for duplex printing given by the
controller is unreachable.
Fuser package won't become ready.
Option package won't become ready.
The paper conveying unit is opened during printing.
The front cover is opened during printing.
The duplex cover is opened during printing.
The paper conveying cover is opened during printing.
The BR conveying unit is opened during printing.
The BR eject cover is opened during printing.
MP lift sensor 1 (MPLS1) does not turn on within spec-
ified time of the MP lift plate rising.
A sequence error has caused.
The PF paper conveying cover is opened during print-
ing.
1-4-3
2MN/2N1
Jam
location*
-
-
-
-
-
-
-
-
-
E
-
F
E
G
G
D
-
E