Df Paper Entry Sensor Non Arrival Jam; Df Paper Entry Sensor Stay Jam; Df Middle Eject Sensor Non Arrival Jam; Df Middle Eject Sensor Stay Jam - Kyocera FS-C8600DN Service Manual

Code Contents
6100 DF paper entry sensor
non arrival jam
6101
6110 DF paper entry sensor
stay jam
6111
6200 DF sub eject sensor non
arrival jam
6210 DF sub eject sensor stay
jam
6300 DF middle eject sensor
non arrival jam
6301
6310 DF middle eject sensor
stay jam
6311
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Conditions
DF paper entry sensor (DFPES) is not turned on even
if a specified time has elapsed after the machine eject
signal was received (4000-sheet finisher).
DF paper entry sensor (DFPES) is not turned on even
if a specified time has elapsed after the machine eject
signal was received (1000-sheet finisher).
DF paper entry sensor (DFPES) is not turned off within
specified time of its turning on (4000-sheet finisher).
DF paper entry sensor (DFPES) is not turned off within
specified time of its turning on (1000-sheet finisher).
DF sub eject sensor (DFSES) does not turn on within
specified time of DF paper entry sensor (DFPES) turn-
ing on.
DF sub eject sensor (DFSES) is not turned off within
specified time of its turning on.
DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (4000-sheet finisher).
DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (1000-sheet finisher).
DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (4000-sheet fin-
isher).
DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (1000-sheet fin-
isher)
1-4-23
2MN/2N1
Jam
location*
H
H
H
H
H
H
H
H
H
H