Kyocera FS-C8600DN Service Manual page 106

Item No.
U051 [LSU Out Top B/W]
Display
MPT(L)
Cass(L)
Dup(L)
MPT(S)
Cass(S)
Dup(S)
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
[LSU Out Top 3/4]
Display
MPT(L)
Cass(L)
Dup(L)
MPT(S)
Cass(S)
Dup(S)
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
2. Change the setting value using the numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflec-
tion.
3. Press the OK key. The value is set.
Completion
Press the Back key. The indication for selecting a maintenance item No. appears.
Description
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Description
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Print
example 1
1-3-38
Description
Setting
range
-30 to 20 -
-30 to 20 -
-30 to 20 -
-30 to 20 -
-30 to 20 -
-30 to 20 -
Setting
range
-30 to 20 -2
-30 to 20 -2
-30 to 20 -2
-30 to 20 -2
-30 to 20 -3
-30 to 20 -2
Print
example 2
Figure 1-3-6
2MN/2N1-1
Initial setting
45ppm 55ppm
-8
-8
-8
-8
-8
-8
Initial setting
45ppm 55ppm
-2
-2
-2
-2
-3
-2