Selecting The Timing For Print Counting; Setting Oem Purchaser Code - Kyocera FS-C8600DN Service Manual

Item No.
U260

Selecting the timing for print counting

Description
Changes the print count timing for the total counter and other counters.
Purpose
To be set according to user request.
Setting
1. Press the OK key.
2. Select the print count timing.
Feed
Eject
Initial setting:
3. Press the OK key. The setting is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U265

Setting OEM purchaser code

Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main PWB and the like.
Setting
1. Press the OK key.
2. Change the setting value using the numeric keys.
3. Press the OK key. The setting is set.
4. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
Display
When secondary paper feed starts
When the paper is ejected
Eject
Description
Description
1-3-108
2MN/2N1-1