Setting The Value For Maintenance Due Indication; Setting A Gamma Table - Kyocera FS-C8600DN Service Manual

Item No.
U345

Setting the value for maintenance due indication

Description
Sets when to display a message notifying that the time for maintenance is about to be reached,
by setting the number of prints that can be made before the current maintenance cycle ends.
When the difference between the number of prints of the maintenance cycle and that of the main-
tenance count reaches the set value, the message is displayed.
Purpose
To change the time for maintenance due indication.
Setting
1. Press the OK key.
2. Change the setting using the numeric keys.
Display
Cnt
3. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U410

Setting a Gamma table

Description
Setting a Gamma table.
Purpose
Setting a Gamma table.
Method
1. Press the OK key.
2. Select the item to set.
Table1
Table2
Table3
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Time for maintenance due indication
(Remaining number of prints that can be made
before the current maintenance cycle ends)
Display
Gamma table1
Gamma table2
Gamma table3
Description
Description
Description
1-3-115
2MN/2N1-1
Setting Initial
range setting
0 to 9999 0