Detaching And Refitting The Transfer Roller - Kyocera FS-C8600DN Service Manual

(4) Detaching and refitting the transfer roller

Procedure
1. Pull out the paper conveying unit.
2. Loosen two fixed screws on the TC
guide.
3. Remove the stop ring.
4. Unhook the hook and remove the TC
gear Z29R.
5. Remove two bearings.
6. Remove the transfer roller.
Figure 1-5-58
Transfer roller (shaft)
Bearing
TC gear Z29R
Hook
TC guide
Screw
TC guide
TC guide
Figure 1-5-59
1-5-38
Paper conveying
unit
Bearing
Transfer roller (shaft)
Transfer roller
Screw
2MN/2N1
Stop ring