Resetting Partial Operation Control; Checking The Total Counter Value; Clearing The Print Coverage Data - Kyocera FS-C8600DN Service Manual

Item No.
U906

Resetting partial operation control

Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the cassettes or other sec-
tions, and the related parts are serviced.
Method
1. Press the OK key.
2. Press [Execute].
3. Press the OK key to reset partial operation control.
4. Exit the maintenance mode, perform shut-down, and turn the main power switch to off and on
again. Allow more than 5 seconds between Off and On.
U908

Checking the total counter value

Description
Displays the total counter value.
Purpose
To check the total counter value.
Method
1. Press the OK key. The total count value is displayed.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U910

Clearing the print coverage data

Description
Clears the accumulated data for the print coverage per A4 size paper and its period of time (as
shown on the service status report).
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the OK key.
2. Select [Execute].
3. Press the OK key. The print coverage data is cleared.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Description
1-3-139
2MN/2N1-1